GSM Logo George S. Maier Company Precision Measuring Equipment

5070 WEST CHESTER PIKE, EDGMONT, PA 19028
(610)-353-6821 FAX (610)353-3649

 Home     Our Suppliers     Contact Us     E-Mail Login
  
Search Catalog
      GO   
 All Categories    Truncated Set Plug Thread Gages
All Categories > Thread Plug Gages > Truncated Set Plug Thread Gages > View Items  
Download PDF Download PDF         Email Email This Page     Save To Favorites Save To Favorites

Truncated Set Plug Thread Gages

 
Check up to five results to perform an action.

Truncated Setting Plug gages provide an accurate control in checking or setting thread ring gages. They are made from an oil hardening tool steel in full conformance to American Gage Design standards B47.1 and to ANSI B1.2 & B1.16M. They are held to Class "W" tolerances on lead, flank angles, and staitness (taper) and are available in Class "X" or "W" tolerance in pitch diameter. Truncated set plugs have a common pitch diameter the full thread length. The front, or truncated portion of the major diameter is truncated for one half the length. The rear portion, is full form. The ring gage is set first to the truncated portion noting the feel or fit. The ring is then advanced onto the full form portion. If the full form portion will not accept the ring gage, or the ring gage becomes tight and difficult to turn, there could be a flank angle deviation or interference at the major diameter.



Compare Items
   
  Results 1 - 25 of 42 Unit of Measure: Imperial Metric Both 1 2 

Item #

Nominal OD

Threads Per

Pitch

Major Diameter Min (Must Clear)

Pitch Diameter
Min. GO

Pitch Diameter
Max HI

Minimum Minor Diameter

Maximum Minor Diameter
M1.6x0.35 0.06299 in
1.6 mm 		72.57 in 0.35 0.06299 in
1.600 mm 		0.05406 in
1.373 mm 		0.05740 in
1.458 mm 		0.04807 in
1.221 mm 		0.05201 in
1.321 mm
M2xO.4 0.07874 in
2.0 mm 		63.50 in 0.40 0.07874 in
2.000 mm 		0.06850 in
1.740 mm 		0.07205 in
1.830 mm 		0.06169 in
1.567 mm 		0.06610 in
1.679 mm
M2.5x0.45 0.09843 in
2.5 mm 		56.44 in 0.45 0.09843 in
2.500 mm 		0.08693 in
2.208 mm 		0.09067 in
2.303 mm 		0.07925 in
2.013 mm 		0.08417 in
2.138 mm
M3x0.5 0.11811 in
3.0 mm 		50.80 in 0.50 0.11811 in
3.000 mm 		0.10531 in
2.675 mm 		0.10925 in
2.775 mm 		0.09681 in
2.459 mm 		0.10232 in
2.599 mm
M3.5x0.6 0.13780 in
3.5 mm 		42.33 in 0.60 0.13780 in
3.500 mm 		0.12244 in
3.110 mm 		0.12685 in
3.222 mm 		0.11220 in
2.850 mm 		0.11850 in
3.010 mm
M4x0.7 0.15748 in
4.0 mm 		36.29 in 0.70 0.15748 in
4.000 mm 		0.13957 in
3.545 mm 		0.14421 in
3.663 mm 		0.12764 in
3.242 mm 		0.13472 in
3.422 mm
M5x0.8 0.19685 in
5.0 mm 		31.75 in 0.80 0.19685 in
5.000 mm 		0.17638 in
4.480 mm 		0.18130 in
4.605 mm 		0.16276 in
4.134 mm 		0.17063 in
4.334 mm
M6x1 0.23622 in
6.0 mm 		25.40 in 1.00 0.23622 in
6.000 mm 		0.21063 in
5.350 mm 		0.21654 in
5.500 mm 		0.19358 in
4.917 mm 		0.20287 in
5.153 mm
M8x1.25 0.31496 in
8.0 mm 		20.32 in 1.25 0.31496 in
8.000 mm 		0.28299 in
7.188 mm 		0.28929 in
7.348 mm 		0.26169 in
6.647 mm 		0.27213 in
6.912 mm
M8x1 0.31496 in
8.0 mm 		25.40 in 1.00 0.31496 in
8.000 mm 		0.28937 in
7.350 mm 		0.29528 in
7.500 mm 		0.27232 in
6.917 mm 		0.28161 in
7.153 mm
M10x1.5 0.39370 in
10.0 mm 		16.93 in 1.50 0.39370 in
10.000 mm 		0.35535 in
9.026 mm 		0.36244 in
9.206 mm 		0.32976 in
8.376 mm 		0.34157 in
8.676 mm
M10x1.25 0.39370 in
10.0 mm 		20.32 in 1.25 0.39370 in
10.000 mm 		0.36173 in
9.188 mm 		0.36803 in
9.348 mm 		0.34043 in
8.647 mm 		0.35087 in
8.912 mm
M10.0.75 0.39370 in
10.0 mm 		33.87 in 0.75 0.39370 in
10.000 mm 		0.37453 in
9.513 mm 		0.37972 in
9.645 mm 		0.36173 in
9.188 mm 		0.36921 in
9.378 mm
M12x1.75 0.47244 in
12.0 mm 		14.51 in 1.75 0.47244 in
12.000 mm 		0.42768 in
10.863 mm 		0.43555 in
11.063 mm 		0.39787 in
10.106 mm 		0.41106 in
10.441 mm
M12x1.5 0.47244 in
12.0 mm 		16.93 in 1.50 0.47244 in
12.000 mm 		0.43409 in
11.026 mm 		0.44157 in
11.216 mm 		0.40850 in
10.376 mm 		0.42031 in
10.676 mm
M12x1.25 0.47244 in
12.0 mm 		20.32 in 1.25 0.47244 in
12.000 mm 		0.44047 in
11.188 mm 		0.44756 in
11.368 mm 		0.41917 in
10.647 mm 		0.42961 in
10.912 mm
M12x1 0.47244 in
12.0 mm 		25.40 in 1.00 0.47244 in
12.000 mm 		0.44685 in
11.350 mm 		0.45315 in
11.510 mm 		0.42980 in
10.917 mm 		0.43909 in
11.153 mm
M14x2 0.55118 in
14.0 mm 		12.70 in 2.00 0.55118 in
14.000 mm 		0.50004 in
12.701 mm 		0.50839 in
12.913 mm 		0.46594 in
11.835 mm 		0.48071 in
12.210 mm
M14X1.5 0.55118 in
14.0 mm 		16.93 in 1.50 0.55118 in
14.000 mm 		0.51283 in
13.026 mm 		0.52031 in
13.216 mm 		0.48724 in
12.376 mm 		0.49906 in
12.676 mm
M15x1 0.59055 in
15.0 mm 		25.40 in 1.00 0.59055 in
15.000 mm 		0.56496 in
14.350 mm 		0.57126 in
14.510 mm 		0.54791 in
13.917 mm 		0.55720 in
14.153 mm
M16x2 0.62992 in
16.0 mm 		12.70 in 2.00 0.62992 in
16.000 mm 		0.57878 in
14.701 mm 		0.58713 in
14.913 mm 		0.54469 in
13.835 mm 		0.55945 in
14.210 mm
M16X1.5 0.62992 in
16.0 mm 		16.93 in 1.50 0.62992 in
16.000 mm 		0.59157 in
15.026 mm 		0.59906 in
15.216 mm 		0.56598 in
14.376 mm 		0.57780 in
14.676 mm
M17x1 0.66929 in
17.0 mm 		25.40 in 1.00 0.66929 in
17.000 mm 		0.64370 in
16.350 mm 		0.65000 in
16.510 mm 		0.62665 in
15.917 mm 		0.63594 in
16.153 mm
M18X1.5 0.70866 in
18.0 mm 		16.93 in 1.50 0.70866 in
18.000 mm 		0.67031 in
17.026 mm 		0.67780 in
17.216 mm 		0.64472 in
16.376 mm 		0.65654 in
16.676 mm
M20x2.5 0.78740 in
20.0 mm 		10.16 in 2.50 0.78740 in
20.000 mm 		0.72346 in
18.376 mm 		0.73228 in
18.600 mm 		0.68087 in
17.294 mm 		0.69858 in
17.744 mm
  Results 1 - 25 of 42 1 2 
   
Copyright © GSM 2004